Dell W01C001, W01C002 setup guide Dell DataSafe Local Backup Basic, Restoring Your Operating System

NOTE: If Dell DataSafe Local Backup is not available on your computer, use Dell Factory Image Restore (see “Dell Factory Image Restore” on page 66) to restore your operating system.

You can use Dell DataSafe Local Backup to restore your hard drive to the operating state it was in when you purchased your computer, while preserving the data files.

Dell DataSafe Local Backup allows you to:

•Backup and restore your computer to an earlier operating state

•Create system recovery media

Restoring Your Operating System

Dell DataSafe Local Backup Basic

To restore your operating system and the Dell factory-installed software while preserving the data files:

1.Turn off your computer.

2.Disconnect all the devices (USB drive, printer, and so on) connected to the computer and remove any newly added internal hardware.

NOTE: Do not disconnect the AC adapter.

3.Turn on your computer.

4.When the DELL™ logo appears, press <F8> several times to access the Advanced Boot Options window.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft Windows desktop; then, shut down your computer and try again.

63