w w w . d e l l . c o m s u p p o r t . d e l l . c o m
PIP/POP/PBP
You can view two active sources simultaneously using
For POP, you can select from three different POP options:
•POP1 — One large POP window to the left and a smaller, centered window on the right.
•POP3 — One large POP window to the left and three smaller,
•POP12 — One large, centered POP window surrounded by twelve smaller windows.
| The remote control offers the following |
PIP/POP/PBP | PIP/POP/PBP options: |
| •Use the PIP button or the POP PBP button |
BACK | on the remote control to turn on and off PIP, |
PIP/POP/PBP | POP, and PBP. |
PIP |
TRANSPARENCY | 38 | •If you are in PIP, POP, or PBP mode, use the |
| SWAP button on the remote control to | |
|
|
SIZE | 38 | switch between the two windows. |
|
|
HORIZONTAL POSITION | 38 | •Use the POS button on the remote to | |
VERTICAL POSITION |
| ||
38 | change which corner of the screen the PIP | ||
| |||
PIP SOURCE |
| ||
TV | window appears. | ||
|
| ||
AUDIOS SOURCE | MAIN | In the OSD, you can adjust the | |
|
| ||
|
| Transparency, the Size, and H (horizontal) | |
|
| and V (vertical) position of the PIP/POP/PBP |
windows. When you are selecting the horizontal orientation, - moves the window left and + moves the window to the right. When you are adjusting the vertical orientation, 0 is at the top of the screen and 100 is at the bottom of the screen.
POP Scan Mode allows you to select Sequential or Float. Float mode plays the source for selected channels that appear in the windows. Sequential rotates through each window and plays all of the preselected channels. The rotation runs through all the available channels before it starts again at the lowest channel.
26
Using the
