Dell manual Re-setting the Dell Wireless Docking Station WLD15, Reset

Video Ports	•	mini DisplayPort x 1
	•	HDMI x 1
	•	VGA x 1
Input/Output Ports	•	USB 3.0 x 2
	• USB 3.0 PowerShare x 1
	• USB 2.0 x 2
	• Gigabit Ethernet (RJ–45) x 1
	• Headset connector x 1
	• Line-out connector x 1

If the wireless link between the laptop and the Dell Wireless Docking Station becomes weak, move the laptop closer to the Dell Wireless Docking station or rotate the laptop to find a position with a stronger wireless link. For example, if you find that the wireless signal strength is reduced when the laptop lid is closed, you can open the laptop lid to find the best reception.

NOTE: The wireless connection works best if your laptop lid (logo side) directly faces the front side of the docking station and there is a line-of-sight between the laptop and the docking station.

Re-setting the Dell Wireless Docking Station WLD15

To re-set to the default factory settings, first power off the docking station, press the re-set button for more than 2 seconds, and then power on the docking station.

Figure 7. Reset

The Reset button is intended for recovering from undesired situations. It restores default parameters and the factory firmware version. The table below describes the reset button functionality:

Function	Action	Effect
Parameters recovery	Long press (>2 sec)	Restores all parameters to
		factory defaults.

12