Dell X2956 Inside Your Computer, Attaching the Optional Cable Cover, Removing the Computer Cover

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

CAUTION: If your power cord or adapter provides a green ground wire for connection to an electrical outlet, do not permit contact between the green ground wire and power leads because electrical shock, fire, or damage to your computer can occur (see the following figure).

4Connect the metal ground connector to the grounding source on

the outlet (see the following figure):

a Loosen the grounding source.

bSlide the metal ground connector behind the grounding source, and then tighten the grounding source.

5 Connect the AC power cable to the outlet.

	grounding
Attaching the Optional Cable Cover	source

1Ensure that all external device cables are

threaded through the hole in the cable
	metal ground connector
cover and connected to the computer back
panel.

2Hold the bottom of the cable cover and align the four tabs with the four slots on the computer back panel.

3	Insert the tabs into the slots and slide the	cable cover
	cable cover toward the diagnostic lights (see	(optional)
	the figure) until the cable cover is securely
	positioned.
4	Install a security device in the security cable
	slot (optional).

Inside Your Computer

	security
Removing the Computer Cover	cable slot

CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.

CAUTION: To avoid electrical shock, always unplug your computer from the power adapter before removing the cover.

16

Quick Reference Guide