Dell XE specifications Removing the Memory, Replacing the Memory

Back to Contents Page

Memory

Dell™ OptiPlex™ XE Service Manual—Small Form Factor

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Removing the Memory

NOTE: You may need to install Adobe® Flash® Player from Adobe.com in order to view the illustrations below.

1.Follow the procedures in Before Working Inside Your Computer.

2.Remove the optical drive.

3.Remove the hard drive assembly.

4.Press down on the memory retention clips to release the memory module.

5.Lift the memory module out of its connector and remove it from the computer.

Replacing the Memory

To replace the memory module, perform the above steps in reverse order.

Back to Contents Page