Dell XE specifications Jumper Settings, Clearing Forgotten Passwords, Jumper Setting Description

To reset system and/or administrator passwords, see Clearing Forgotten Passwords.

Jumper Settings

Jumper	Setting	Description
PSWD		Password features are enabled (default setting).
		Password features are disabled.
RTCRST		The real-time clock has not been reset.
		The real-time clock is being reset (jumpered temporarily).
	jumpered	unjumpered

Clearing Forgotten Passwords

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION: This process erases both the system and administrator passwords.

1.Follow the procedures in Working on Your Computer.

2.Remove the computer cover.

3.Locate the 2-pin password jumper (PSWD) on the system board, and remove the jumper to clear the password. See Password Protection.

4.Replace the computer cover.

5.Connect your computer and monitor to electrical outlets, and turn them on.

6.After the Microsoft® Windows® desktop appears on your computer, shut down your computer.

7.Turn off the monitor and disconnect it from the electrical outlet.

8.Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board.

9.Open the computer cover.

10.Locate the 2-pin password jumper on the system board and attach the jumper to reenable the password feature.

11.Replace the computer cover.

CAUTION: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.