Dell XPS13-4040SLV Removing the Power-Light Board

12 | Removing the Power-Light Board

Removing the Power-Light Board

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before Working Inside

Your Computer" on page 7. After working inside your computer, follow the

instructions in "After Working Inside Your Computer" on page 9.

For more safety best practices, see the Regulatory Compliance home page at

dell.com/regulatory_compliance.

Prerequisites

Remove the base cover. See "Removing the Base Cover" on page 10.

Procedure

1Lift the connector latch and, using the pull-tab, disconnect the power-light board

cable from the system board.

2Remove the screw that secures the power-light board to the palm-rest assembly.

3Lift the power-light board off the palm-rest assembly.

1screw 2power-light board

3power-light board cable