FITTING REQUIREMENTS
The appliance should be installed by a QUALIFIED INSTALLATION TECHNICIAN.
The appliance must be installed in compliance with regulations in force.
The walls surrounding the oven must be made of
WARNING: Taking care NOT to lift the oven by the door handle.
The oven can be fitted in standard units, width 90 cm and depth 60 cm.
Installation requires a com- partment as illustrated in figures 5 and 6.
On the lover side, the oven must lay on supports standing the oven weight.
784
89 | 6 |
min. 860
853
674 | 048 | 0 |
|
| |
|
| 5 |
|
| 5 |
|
| . |
|
| in |
|
| m |
4 |
|
|
4 |
|
|
5 |
|
|
2 | Figure 5 | |
2 |
|
|
min. |
|
900 | |
mi |
|
n. | |
| 860 |
853 |
|
WARNING
When correctly installed, your product meets all safety requirements laid down for this type of prod- uct category.
However special care
4 87
89 | 6 |
|
4 76
4 4 5
2 2
084 | 0 | |
|
| 5 |
|
| 5 |
|
| . |
|
| in |
|
| m |
|
|
|
should be taken around the rear or the underneath of the appliance as these areas are not designed or intended to be touched and may contain sharp or rough edges, that may cause injury.
Figure 6
8
