USING GAS BURNERS
■■ Check that the electricity is switched on to allow spark ignition. ■■ Make sure that all controls are turned to zero.
■■ The gas flow to the burner is controlled by a tap incorporating a safety
■■ You control the flow by turning the knob indicator to line up with the following symbols:
Symbol | 0 | : tap closed (burner off) | |
Symbol |
| : High (maximum) | |
Symbol |
| : Low (minimum) |
■■ You can control the temperature by the knob to “High” (maximum) from “Low” “Minimum”. ■■ To switch off, turn the knob clockwise until you hear the safety click.
■■ Note that, if you are using a burner at the minimum setting, you turn the knob clockwi- se past the maximum setting before reaching the off position.
■■ Whenever lighting any of the burners produces an abnormal flame, switch that burner off and relight using the minimum setting.
■■ If after relighting the burner, the flame is still abnormal, turn the burner off and contact our Customer Service Centre to obtain the nearest authorized Delonghi Service Agent.
■■ In the case of a mains failure light the burner with a match or lighted taper.
■■ Note: When the cooker top is not being used, set the gas knobs to their closed posi- tions and also close the cock valve on the gas bottle or the main gas supply line.
Figure 13a
Figure 13b |
18
