DeLonghi ROOM TEMPERATURE BUTTON MODEL FX400ECO, Self-Diagnosis, H P High Pressure, Full Tank

FX160/400ECO GB 20-06-2002 16:51 Pagina 31

O p e r a t i o n

ROOM TEMPERATURE BUTTON (MODEL FX400ECO)

When pressing this button (R), the room temperature is shown on the display for a few seconds. It then reverts to showing the current mode. The room temperature cannot be displayed while in Stand-by mode.

SELF-DIAGNOSIS

The appliance is equipped with a self-diagnosis system which identifies any operating problems.

IF THE DISPLAY SHOWS…	….WHAT SHOULD YOU DO?
H P HIGH PRESSURE	Insert and re-insert the plug. If the problem persists, call the service
	centre.
LOW TEMPERATURE	If the machine is operating as an air-conditioner or dehumidifier, this
	will prevent the formation of ice. The appliance will start up auto-
	matically once the defrosting process has ended.

F F FAN FAILURE

If either of these messages appears, call the service centre.

P F PROBE FAILURE

	FX160ECO
	Empty the tank at the rear of the appliance and reposition correc-
FULL TANK	tly.

FX400ECO

Empty the internal tank (not visible) through the small drain tube (11); replace the rubber stopper.

ENGLISH

31