FX160/400ECO GB
C l e a n i n g
Before cleaning or maintenance, switch off the appliance by pressing the ON/OFF button (A) and always unplug it from the mains supply.
CLEANING THE EXTERNAL UNIT
We recommend cleaning the appliance with a slightly damp cloth. It should then be dried. For safety reasons, do not wash the
Precautions
Never clean with benzene, alcohol or sol- vents. Never spray with liquid insecticide or similar.
CLEANING THE AIR FILTERS
To maintain the
1.Clean the dust filter weekly.
2.Replace the air filters at the end of each season or when necessary (follow the instructions on the appliance near the fil- ter).
The filters are located behind the two intake grills. The grills contain the filters.
To clean the filters:
1.Remove the intake grills by rotating them outwards. (fig 17)
2.Remove the 3M purification filter (white).
2
117
3.Remove the dust filter by detaching it from the external grill.
To remove the dust deposited on the anti-
Dust filter
intake grille
Purification filter 3M
18
bacterial filter, use a vacuum cleaner. If very dirty, immerse in warm water (not more than 40° C) and rinse thoroughly.
Allow the filter to dry. To replace, fit the filters to the intake grill and attach to the applian- ce.
Do not try to clean the 3M filter as this could result in a reduction of filter capacity.
BEGIN OF SEASON CHECKS
Check that the power cord and plug are undamaged and that the appliance is pro- perly earthed.
The installation instructions should be observed meticulously.
END OF SEASON OPERATIONS
Empty the water from the tank.
Mod. FX160ECO:
Remove the tank (9) and empty it. To drain any residual water from the internal circuit, remove the stopper (11) from the drain tube
(10)and drain completely.
Mod. FX400ECO:
Empty the internal tank (not visible) through the small drain tube (10); replace the rubber stopper (11).
Clean the
ENGLISH
33
