FX160/400ECO GB
O p e r a t i o n
SWITCHING THE APPLIANCE ON
Connect the appliance to the mains supply.
On the display two lines will appear indicating
Press the ON/OFF button (A) and then the MODE button until the relevant function indicator appears viz.:
Indicator C 
:
Indicator D 
: dehumidifying
Indicator E 
: purification/ventilation
AIR-CONDITIONING FUNCTION
This function is ideal in hot, humid weather conditions when the atmosphere requires to be cooled and dehumidified.
To ensure proper function of the appliance, after selecting the
red temperature appears on the display.25 The temperatures most suited to the atmosphere in summer vary
between 24 and 27°C. We do not advise selection of tempera- tures much lower than those outside.
Select fan speed by pressing the “FAN” button (Q) until the fan speed indicator appears:
MAX (P): if you want the maximum power of the
MIN (O): if you want to reduce the level of noise and still main- tain a good level of comfort.
SILENT (N): when minimum noise is required,
AUTO (M):if you prefer the appliance to select the fan speed for the temperature selected on the display panel.
DEHUMIDIFYING FUNCTION
This function is ideal for reducing humidity in the atmosphere while avoiding increases or decreases in temperature (in between seasons, damp places, wet spells of weather).
When you select the dehumidifying function, the letters “ 
” will appear on the display.
Model FX160ECO: the water is collected in the tank at the rear of the appliance.
When the tank is full, the appliance will stop working and the display will show the letters “ 
” (Full Tank); the tank must then be emptied. When it is
Mod. FX400ECO: the water is eliminated via evaporation in the external unit. However, we recommend fitting the drain coupling to the external unit as shown in fig. 16
Once the dehumidifying function has been selected, the fan speed cannot be changed. The appliance will automatically select the correct fan mode.
ENGLISH
29
