DeLonghi FX400ECO manual Dehumidification, S e t t i n g u p Mod. FX160ECO

FX160/400ECO GB 20-06-2002 16:51 Pagina 25

S e t t i n g u p (Mod. FX160ECO)

AIR CONDITIONING WITH SEMI-PERMA- NENT INSTALLATION

If desired, Pinguino can also be installed on a semi-permanent basis.

30 cm

30 cm

In this case it will be necessary to:

•Drill a hole in a perimeter wall or in a win- dow pane. Observe the height limits (fig. 5) and the dimensions of the hole given in fig.4.

In the window-	In the base	In the wall: we
pane	of the	advise you to
	window	insulate the sec-
	frame	tion of the wall
		with	appropria-
4		te	insulation
		material.

• Fit the flange (13) supplied to the hole.
• Fix the hose (14) in the housing at the rear
of the appliance (fig 1)
• Fit the end of the hose to the flange (15)		ENGLISH
as shown in fig. 5.
	MAX115 cm

MIN 50 cm

5

When the hose (14) is not connected, the hole can be closed off with the flange stop- per (12).

N.B.

When operating the appliance with semi-per- manent installation, it is advisable to leave a door slightly ajar (even only 1cm), to ensure free circulation of air.

DEHUMIDIFICATION

Position the appliance in the room without inserting the air exhaust hose (14); this ensures that the dehumidified air will be released directly into the atmosphere.

The air emitted through the front grill will be cold while the air from the rear will be warm (fig. 6) thus ensuring that the room is dehumi- dified without variation in temperature.

6

25