11
HOW TO ATTACH THE PLANER TO THE STAND 1. CAREFULLY lift the planer on the stand.
2. Alignthe four holes in the bottom of the planer (not
shown)withthemountingholes(AA) Fig.16inthetop
of the stand.
3. Use the four remaining M8 carriage head bolts, M8
lock washers and M8 hex nuts to secure the planer to
the stand. Insert bolts down through holes in planer
and stand. Place lock washers then nuts on bolts and
tighten.
4. Attachtheshifterknobbyscrewingitintoplaceat(SS)
Fig. 17.
5. Screwdownange (FF)Fig. 18ofplaner headto the
smallmountingholes(HH)Fig. 18inangeandstand.
Insert two M3 Phillips head screws down through holes
(HH)andattach theangeto thestandusingtwo M3
serrated hex flange nuts.
Fig. 16
AA
Fig. 17
SS
Fig. 18
FF
HH
HH