9
ATTACHING LEVELING FEET1. Turn stand over on its side and attach four leveling feet
(K)Fig.5tothefour tappedholesinthebottomof the
legs(B).Besurelevelingfeetjamnuts(L)areloose.
2. Turn machine upright and rotate leveling feet until
machine is level.
3. Tighten jam nuts.
ATTACHING PLANER STAND TO FLOORIf you desire, you can secure the stand to the floor. You can
usethefourholes(M)Fig.6forthispurpose.
ATTACHING HANDWHEEL1. Attachhandwheelhandle (N)Fig.7to handwheel(O).
Use 12 mm open end wrench on flats to tighten.
2. Attachhandwheel(O) toelevationshaft(P) Fig.8and
tightenhandwheel set screw (Q) FIg. 9 with supplied
hexwrench. Be sure set screw engages groove (R)
Fig. 8 in elevation shaft.
NOTE:Besuretwohead-lockingknobs(oneshown at
(S)Fig.10)areloosebeforeraisingheadassembly.
3. Raise head assembly and remove shipping brace.
M
Fig. 5
Fig.6
S
Fig. 10
K
L
N
B
O
P
R
Q
Fig.7
Fig. 8
Fig. 9