MITER GAGE HOLDER AND
WRENCH HOLDER
The miter gage (A) Fig.36, and arbor wrenches (B), can be stored in the slots provided in the motor cover, as shown in Fig. 36.
B
A
Fig. 36
ASSEMBLING RIP FENCE
HOLDER BRACKETS
Assemble the rip fence holder brackets (A) and (B) Fig. 37, to the four holes located in the right hand side of the saw cabinet using four #10 x 1/2" sheet metal screws supplied.
ASSEMBLING DUST CHUTE
ADAPTER
The Unisaw is supplied with a dust chute connector to provide a means of connecting a 4" diameter dust collector hose to the machine. Align the four holes in the dust chute adapter (A) Fig. 38,with the four holes in the back of the motor cabinet (B) and attach the dust chute adapter with four #10 x 1/2" sheet metal screws. NOTE:
DO NOT MOUNT THE DUST CHUTE ADAPTER UNLESS A DUST COLLECTION SYSTEM IS USED IN CONJUNCTION WITH THE SAW, AS THE DUST CHUTE ADAPTER WILL RESTRICT THE GRAVITY FEED OPENING FOR SAW DUST REMOVAL.
A
B
Fig. 37
A
B
Fig. 38
16
