Fig. 1
1. Unisaw
2. Switch (shown with a GPE switch)
Fig. 2
3. Extension wing
4. Handwheel
5. Blade guard and splitter assembly
6. Upper bracket for splitter
7. Lower bracket for support rod
8. Support rod
9. 7/8" Open end arbor wrench
10. 7/8"x1/2" Closed end arbor wrench
11. Dust chute
12. Miter gage
13. Cap for miter gage handle
14. Handle for miter gage
15. Handwheel lock knob
16. 1/8" Hex wrench
17. 5/64" Hex wrench
18. Hanger for rip fence (2)
19. Motor cover
20. 7/16-20x1¼" Hex head screw (3)
21. 5/16-18x1" Hex head screw (4)
22. 5/16-18x1" Flat Head Screw (1)
23. #10x1/2" Hex washer head screw (8)
24. 10-32x1/2" Pan head screw (2) ( for use w/ LVC models only)
25. 3/4" I.D. Fiber washer (1)
26. 5/8" I.D. Internal tooth washer (1)
27. 7/16" I.D. Flat washer (3)
28. 5/16" I.D. Flat washer (2)
29. 5/16" I.D. Flat washer (1) (for use w/ GPE models only)
30. 5/16" I.D. Lockwasher (3)
31. 1/4" I.D. Fiber washer (1)
32. 13/64" I.D. Flat washer (2) (for use w/ LVC models only)
33. 5/8-18 Jam nut (1)
34. 5/16-18 Hex nut (1) (for use w/ GPE models only)
35. 1-3/8" Key (1)
36. Spring clip (2) (for use w/ LVC models only)
8
FOREWORD
The Delta Unisaw is a 10" left tilting arbor saw. The maximum depth of cut at 90 degrees is 31/8�� (79 mm) and at 45 degrees
is 21/8” (54 mm).
FUNCTIONAL DESCRIPTIONNOTICE: THE PHOTO ON THE MANUAL COVER ILLUSTRATES THE
CURRENT PRODUCTION MODEL. ALL OTHER ILLUSTRATIONS CONTAINED
IN THE MANUAL ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE
ACTUAL COLOR, LABELING OR ACCESSORIES AND ARE INTENDED TO
ILLUSTRATE TECHNIQUE ONLY.
1
2
34 5
67
8
9
10
11
12 13 14
15 1617 18 19
20
21
22
23
24
25
26
27
28
29
30
32
33
34
35
36
31
Fig. 1 Fig. 2
CARTON CONTENTS