2.Use a #5 Allen wrench to remove the three screws (A) Fig. 72. Slide the spindle handle out. Pull the spindle lock to the out position (see Fig. 24A).

3.Remove the belt (A) Fig. 73 from the pulley (B).

NOTE: When pulling the belt out or replacing the belt, pull the spindle lock handle (B) Fig. 72 out to its fullest position to give more room (C) Fig. 73 for belt removal or replacement.

4.Replace new belt by using these instructions in reverse order.

A

B

Fig. 72

A

C

B

Fig. 73

SERVICE

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

20

Page 20
Image 20
Delta 46-715 instruction manual PARTS, Service or Warranty Assistance