ASSEMBLING FILTER AND DUST COLLECTION BAGS TO DRUM
1.Hook the loop on the top of filter bag (A) Fig. 22, onto filter bag support rod (B) as shown.
2.Assemble extension rod (C) Fig. 23, into the end of filter bag support rod (B). Raise support rods (B) and (C), with filter bag (A) attached and place end of extension support rod into holes of bracket (D). NOTE: Flared end of filter bag extension rod will prevent the rod from sliding through bracket.
3.Insert band (F) Fig. 24, through the loops of filter bag. Position open end of filter bag (A) Fig. 24, over upper lip of drum (E) and fasten with clamp (G) as shown in Fig. 25. NOTE: Make certain band (F) is positioned in the channel of drum (E) before fastening clamp (G).
A
B
Fig. 22
B
A
C
D
Fig. 23
A
G
F
E
Fig. 24
F
G
E
Fig. 25
9
