4
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistenedw ith kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax.
Fig. 2
Fig. 3
Fig. 2
1- Swivel Casters (4)
2- Base
3- “U” Brackets For
Filter Bag Support
Rods (2)
4- Left-Hand Drum
5- Dust Chute
6- Right-Hand Drum
7- Eight-Hole Rubber
Gaskets (2)
8- Ten-Hole Rubber
Gasket
Fig. 3
9- Dust Collection
Bags (2)
10 - Filter Bags (2)
11 - Drum Supports (4)
12 - Blower and Motor
Assembly
13 - Intake Ports
14 - Intake Port
Caps (4)
15 - Support Rods (2)
16 - Support Rod
Extensions (2)
17 - Bag Locking
Bands (4)
18- Lower Dust Bag
retaining Clips (8)
Hardware (*not shown)
* - 5/16 - 18 x 5/8 hex head screws (66)
* - 5/16 lockwashers (66)
* - 5/16 - 18 hex head nuts (12)
* - M4 x 12 sheet metal screws (4)
* - 5/16 x 15/16 O.D. flat washers (16)
* - 1/4-20x5/8" Hex Head Screws (16)
* - 1/4" Lockwashers (16)
* - 1/4"-20 Hex Nuts (16)
1
2
3
4
56
78
9
10
11
12
13
14
15
16
17
18