MODEL
THREE PHASE
INSTALLATION
Your dust collector is supplied with a motor and controller; however, it is not supplied with a power cord and plug.
1.To connect the dust collector to a power system, remove controller cover (A) Fig. 32.
2.Bring three phase power line through the access hole (B) Fig. 32, in the top of controller box and connect the three power lines to terminals (C) Fig. 33, and the green ground wire to ground screw (D).
3.After connecting the power cord to the machine, make certain the rotation of the motor is in the proper
direction by viewing the rotation of the blower fan. The fan should rotate in a clockwise direction.
WARNING:
DO NOT INSERT FINGERS OR ANY FOREIGN OBJECT INTO THE DUST INTAKE PORT. Rotation of the motor can be reversed by interchanging any two of the three incoming power lines connected to terminals
(C) Fig. 33.
MODEL
SINGLE PHASE
INSTALLATION
Your dust collector is supplied with a motor and controller; however, it is not supplied with a power cord and plug.
1.To connect the dust collector to a power system, remove controller cover (A) Fig. 34.
2.Bring the single phase power line through the access hole (B) Fig. 34, in the top of controller box and connect the two power lines to terminals (E) Fig. 35, and the green ground wire to ground screw (F).
3.After connecting the power cord to the machine, the fan should rotate in a clockwise direction. 
WARNING: DO
NOT INSERT FINGERS OR ANY FOREIGN OBJECT INTO THE DUST INTAKE PORT.
B
A
Fig. 32
D
C
Fig. 33
B
A
Fig. 34
E
F
Fig. 35
12
