Installing the Scanner

Installation Requirements

In order to use the DR-5010C, your computer must satisfy the following system requirements:

•A computer that meets the following specifications:

-CPU: Pentium 4 (1.5 GHz or higher)

-Memory: 512 MB or more (1 GB or more recommended)

-Hard disk: 1 GB or more available space

-CD-ROM drive

-SCSI board or Hi-Speed USB 2.0 interface

-Monitor: Resolution of 1024 x 768 (XGA) or better recommended

•SCSI board or USB 2.0 interface board that supports the scanner (See “Interface Cards,” on p. 19.)

•Hi-Speed 2.0 interface equipped with your PC or Hi-Speed 2.0 interface board compatible with your scanner

•One of the following operating systems:

Connecting via SCSI

-Microsoft Windows 98 SE

-Microsoft Windows Me

-Microsoft Windows NT 4.0 Workstation SP6

-Microsoft Windows 2000 Professional SP3 or later

-Microsoft Windows XP Professional SP1 or later

-Microsoft Windows XP Home Edition SP1 or later

Connecting via USB 2.0

-Microsoft Windows 98 SE

-Microsoft Windows Me

-Microsoft Windows 2000 Professional SP3 or later

-Microsoft Windows XP Professional SP1 or later

-Microsoft Windows XP Home Edition SP1 or later

•ISIS compatible or TWAIN compatible application software that runs on your operating system

IMPORTANT

•USB connection is not supported on Windows NT. Connect the scanner via a SCSI cable to use it with a Windows NT system.

•If the Hi-Speed USB 2.0 interface is standard equipment on your computer, then all computer operations are not guaranteed. If the standard Hi-Speed USB 2.0 interface does not operate normally sometimes, then use the recommended Hi-Speed USB 2.0 interface card. Contact your local authorized Canon dealer or service representative for more detailed information.

16Installing the Scanner