Note

•The SCSI ID is set to 2 at the factory.

•The SCSI ID is set with the Dip Switches on the back of the scanner. The Dip Switches are on when they are down, and off when they are up.

•To change the SCSI ID, be sure to turn OFF the scanner and the computer and refer to the following table to set the SCSI ID.

Default Settings

SCSI ID

SW1

SW2

(SCSI ID = 2)

2

OFF

OFF

 

 

 

 

 

1 2

 

3

ON

OFF

ON

 

 

 

 

4

OFF

ON

 

 

 

 

 

 

 

 

 

 

 

 

5

ON

ON

 

 

 

IMPORTANT

•Turn OFF the power to the computer and the scanner before connecting the computer and setting the SCSI ID.

•The scanner has a built-in terminator that is fixed in the “ON” position. To connect the scanner with other SCSI devices in a daisy chain configuration, be sure to position the scanner at the end of the daisy chain, and turn off the terminators in the other SCSI devices.

•Be careful that the IDs for other SCSI devices connected or built-in to the computer do not duplicate the SCSI ID for the scanner.

22Installing the Scanner