Connecting USB Interface
USB Interface Connection
•Be sure to use the USB cable bundled with the scanner or a Hi-Speed USB 2.0compatible cable.
•When using a USB extension card that supports Hi-Speed USB 2.0, be sure to choose one verified for use with the scanner. (See “USB 2.0 Interface Card,” on p. 19.)
Computer
DR-5010C
USB Cable
IMPORTANT
•If the operating system you are using is Windows NT, the connection via USB is not supported. When using the DR-5010C with Windows NT, be sure to connect the scanner via SCSI.
•When using a USB hub, be sure to use one compatible with USB 2.0.
Note
•The DR-5010C passed the Hi-Speed USB 2.0 certification test. However, when you use the scanner with a personal computer equipped with USB 2.0 as standard, the scanner may not always operate normally.
•If the interface is not Hi-Speed USB 2.0 compatible, the scanning speed will slow down.
