3.Select [Search for the best driver in these locations], and then clear the [Search removable media (floppy, CD-ROM...)] check box. Select [Include this location in the search], enter “D:\INF” (assuming that “D” is the letter assigned to your CD-ROM drive), and then click the [Next] button.

4.Although a message appears indicating that the driver “has not passed Windows logo testing”, click the [Continue Anyway] button in the [Hardware Installation] dialog box.

5.Click the [Finish] button on the Completing the Found New Hardware Wizard screen.

IMPORTANT

•The DR-5010C is registered as “CANON DR-5010C SCSI” or “CANON DR-5010C USB” in the Imaging Device directory.

•The displayed device name of the DR-5010C differs depending on the connection, via SCSI or via USB. When having changed the connection, be sure to let the PC recognize the scanner once again.

Turning the Power OFF

CAUTION

If the scanner will not be used for an extended period of time, unplug the power cord for safety’s sake.

1. Turn OFF the PC.

2. Turn OFF the scanner.

The Power Switch is located on the lower left front corner of the scanner. To turn the scanner OFF, press the Power Switch. When the Power Indicator turns OFF, the scanner is OFF.

OFF

Note

•When connecting the DR-5010C via SCSI, turn the scanner ON first, and then turn the PC ON.

•Wait at least 10 seconds before turning the scanner ON aftter it has been turned OFF.

Installing the Scanner

27