Delta Electronics VFD007S23A manual Gnd

		Chapter 2 Installation and WiringVFD-S Series
Terminal	Terminal Function	Factory Settings (NPN mode)
Symbol		ON: Connect to GND
M4	Multi-function input 4
M5	Multi-function Input 5
+17V	DC Voltage Source	+17VDC, 20mA used for PNP mode.
GND	Digital Signal Common	Common for digital inputs and used for NPN
		mode.
		AFM circuit
			AFM
AFM	Analog output meter			0~10V
				ondometer
				Max. 2mA
		Internal Circuit	GND
RA	Multi-function Relay output	Resistive Load:
	(N.O.) a
		5A(N.O.)/3A(N.C.) 240VAC
	Multi-function Relay output	5A(N.O.)/3A(N.C.) 24VDC
RB		Inductive Load:
	(N.C.) b	1.5A(N.O.)/0.5A(N.C.) 240VAC
		1.5A(N.O.)/0.5A(N.C.) 24VDC
RC	Multi-function Relay common	Refer to Pr.3-06 for programming
		Maximum 48VDC, 50mA
		Refer to Pr.3-01 for programming
		MO1-DCM	Max: 48Vdc
				50mA
	Multi-function Output 1	Mo1
MO1
	(Photocoupler)
		MCM
		internal circuit
MCM	Multi-function output common	Max. 48Vdc 50mA
+10V	Potentiometer power supply	+10VDC 10mA (variable resistor: 3~5kohm)

Revision August 2006, SE08, SW V2.61 2-25