Delta Electronics VFD007S23A manual Setting Function Description

Chapter 5 ParametersVFD-S Series

Setting	Function	Description
d10	PLC Program Running	the output will be activated when the PLC program is
		running.
d11	PLC Program Step	the output will be activated for 0.5 sec. when each multi-
	Completed	step speed is attained.
d12	PLC Program Completed	the output will be activated for 0.5 sec. when the PLC
		program cycle has completed.
d13	PLC Operation Paused	the output will be activated when PLC operation is
		paused.
d14	Terminal Count Value	counter reaches Terminal Count Value.
	Attained
d15	Preliminary Counter Value	counter reaches Preliminary Count Value.
	Attained
d16	AC Motor Drive Ready
d17	FWD Command Indication	When AC drive receives the command of forward
		running, it will output immediately no matter AC drive is
		in the state of run or stop.
d18	REV Command Indication	When AC drive receives the command of reverse
		running, it will output immediately no matter AC drive is
		in the state of run or stop.

5-34 Revision August 2006, SE08, SW V2.61