ENGLISH

System Setup

4 Press the CURSOR F or G button to select your surround back speaker type, then press the ENTER or CURSOR H button to switch to the number of surround back speaker setting.

*S.Back Small

LargeSmallNone

When “Small” has been selected for the surround speakers, “Large” cannot be selected for the surround back speakers.

5 Press the CURSOR F or G button to set the number of speakers to be used for the surround back channel, then press the ENTER or CURSOR

Hbutton to switch to the subwoofer setting.

*S.Back 2sp>

2sp><1sp

6 Press the CURSOR F or G button to select your subwoofer setting, then press the ENTER or CURSOR H button to enter the settings and switch to the Delay Time setting.

*Subwoofer Yes

YesNo

•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (bass sound below the frequency set for the Crossover Frequency) signals. If you are unsure, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.

2Parameters

Large:

Select this when using speakers that have sufficient ability to reproduce bass sound below the frequency set for the crossover frequency mode.

Small:

Select this when using speakers that do not have sufficient ability to reproduce bass sound below the frequency set for the crossover frequency mode. When this is set, bass sound with a frequency below the frequency set for the crossover frequency mode is sent to the subwoofer.

None:

Select this when no speakers are installed.

Yes / No:

Select “Yes” when a subwoofer is installed, “No” when a subwoofer is not installed.

2sp / 1sp:

Set the number of speakers to be used for the surround back channel.

If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.

System Setup

Setting the Delay Time

Input the distance between the listening position and each speaker to set the delay time for the surround playback.

Preparations:

Measure the distances between the listening position and the speakers.

FL Center FR

Subwoofer

Listening position

SL

SR

SBL

SBR

1 Press the CURSOR F or G button to set the distance from the front L speaker to the listening position, then press the ENTER or CURSOR H button to switch to the front R speaker setting.

*Front L 12ft

2 Press the CURSOR F or G button to set the distance from the front R speaker to the listening position, then press the ENTER or CURSOR H button to switch to the center speaker setting.

3 Press the CURSOR F or G button to set the distance from the center speaker to the listening position, then press the ENTER or CURSOR H button to switch to the surround L speakers setting.

4 Press the CURSOR F or G button to set the distance from the surround L speakers to the listening position, then press the ENTER or CURSOR H button to switch to the surround R speaker setting.

13

ENGLISH