ENGLISH

Basic Operation

Basic Operation

DENON original surround modes

This unit is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of 7 preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the listening room to achieve a more realistic, powerful sound.

Surround modes and their features

 

 

The front left channel signals are output to the surround and surround back left channels, the front right

1

5CH/7CH STEREO

channel signals are output to the surround and surround back right channels, and the in-phase component

 

 

of the left and right channels is output to the center channel. Use this mode to enjoy stereo sound.

 

 

 

2

MONO MOVIE

Select this when watching monaural movies for a greater sense of expansion.

 

(NOTE)

 

3

ROCK ARENA

Use this mode to achieve the feeling of a live concert in an arena with reflected sounds coming from all

directions.

 

 

 

 

 

4

JAZZ CLUB

This mode creates the sound field of a live house with a low ceiling and hard walls. This mode gives jazz

a very vivid realism.

 

 

 

 

 

5

VIDEO GAME

Use this to enjoy video game sources.

 

 

 

 

 

Select this to emphasize the sense of expansion for music sources recorded in stereo. Signals consisting

6

MATRIX

of the component difference of the input signals (the component that provides the sense of expansion)

 

 

processed for delay are output from the surround channel.

 

 

 

7

VIRTUAL

Select this mode to enjoy a virtual sound field, produced from the front 2-channel speakers or headphones.

 

 

 

Depending on the program source being played, the effect may not be very noticeable.

In this case, try other surround modes, without worrying about their names, to create a sound field suited to your tastes.

NOTE: When playing sources recorded in monaural, the sound will be one-sided if signals are only input to one channel (left or right), so input signals to both channels. If you have a source component with only one audio output (monophonic camcorder, etc.) obtain a “Y” adapter cable to split the mono output to two outputs, and connect to the L and R inputs.

2Personal memory plus

This set is equipped with a personal memorize function that automatically memorizes the surround modes and input modes selected for the different sources. When the input source is switched, the modes set for that source last time it was used are automatically recalled.

The surround parameters, tone control settings and playback level balance for the different output channels are memorized for each surround mode.

26

ENGLISH