System Setup

Setting the Digital In Assignment

This setting assigns the digital input terminals of the AVR-1506 for the different input sources.

1 Press the CURSOR F or G button to assign the input function connected to the COAXIAL 1 input terminal, then press the ENTER or CURSOR

Hbutton to switch the COAXIAL 2 input setting.

*COAX1 CD

CDAUXDVDTVVCRCDROFF

2 Press the CURSOR F or G button to assign the input function connected to the COAXIAL 2 input terminal, then press the ENTER or CURSOR

Hbutton to switch the OPTICAL input setting.

*COAX2 AUX

CDAUXDVDTVVCRCDROFF

3 Press the CURSOR F or G button to assign the input function connected to the OPTICAL input terminal, then press the ENTER or CURSOR H button to switch the Auto Surround Mode setting.

*OPT DVD

CDAUXDVDTVVCRCDROFF

Setting the Auto Surround Mode

The surround mode used last for the three types of input signals shown below is stored in the memory, and the signal is automatically played with that surround mode the next time it is input.

Note that the surround mode setting is also stored separately for the different input sources.

qAnalog and PCM 2-channel signals (STEREO)

w2-channel signals in the Dolby Digital, DTS or another multi- channel format (DOLBY PLIIx Cinema)

eMulti-channel signals in the Dolby Digital, DTS or another multi- channel format (DOLBY/DTS SURROUND)

Default settings are indicated in ( ).

Press the CURSOR F or G button to select the Auto

Surround mode, then press the ENTER or CURSOR

Hbutton to switch the Ext. In Subwoofer Level setting.

*Auto Surr. ON

ONOFF

ENGLISH

System Setup

Setting the Ext. In Subwoofer Level

Set the method of playback of the analog input signal connected to the EXT. IN terminal.

Press the CURSOR F or G button to select the ext. in subwoofer channel level playback, then press the ENTER or CURSOR H button to switch the Power

Amp Assignment setting.

*Ext.In SW+15dB

+0dB+5dB+10dB+15dB

Setting the Power Amp Assignment

Make this setting to switch the power amplifier for the surround back channel to ZONE2.

Power Amp

SPEAKER OUT

Assign.

MAIN ZONE

ZONE2

 

 

 

Surround back

7.1ch system

–

 

 

 

ZONE2

5.1ch system

2ch system

Press the CURSOR F or G button to select “S. Back” or “ZONE2”, then press the ENTER or CURSOR H button if you want to start the settings over from the beginning.

*P.Amp S.Back

S.BackZONE2

•Select “OFF” if nothing is connected.

•“TUNER” and “V. AUX” cannot be selected.

16

ENGLISH