Basic Operation

Auto tuning

1 Set the input source to “TUNER”.

(Main unit)

(Remote control unit)

2 Watching the display, press the BAND button to select the desired band (AM or FM).

3 Press the MODE button to set the auto tuning mode.

Lights

A1 FM 87.50MHz

4 Press the TUNING (+) or (–) button.

Automatic searching begins, then stops when a station is tuned in.

Manual tuning

1 Set the input source to “TUNER”.

2 Watching the display, press the BAND button to select the desired band (AM or FM).

3 Press the MODE button to set the manual tuning mode.

Check that the display’s “AUTO” indicator turns off.

4 Press the TUNING (+) or (–) button to tune in the desired station.

The frequency changes continuously when the button is held in.

•When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.

ENGLISH

Basic Operation

Preset stations

1 Use the “Auto tuning” or “Manual tuning” operation to tune in the station to be preset in the memory.

2 Press the MEMORY button.

3 Press the SHIFT button and select the desired memory block (A to G).

4 Press the PRESET (+) or (–) button to select the desired preset channel (1 to 8).

5 Press the MEMORY button again.

• Store the station in the preset memory.

• To preset other channels, repeat steps 1 to 4.

A total of 56 broadcast stations can be preset — 8 stations (channels 1 to 8) in each of blocks A to G.

•When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.

30

Recalling preset stations

1 Watching the display, press the SHIFT button to select the preset memory block.

2 Watching the display, press the PRESET •(+) or ª (–)button to select the desired preset channel.

ENGLISH