Denon AVR-1506 manual 38

ENGLISH

Advanced Operation

Multi zone music entertainment system

•ZONE2 speaker out can be used when “ZONE2” is selected at “Power Amp Assignment”. In this case, surround back speaker out cannot be used for MAIN ZONE.

•When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.

•For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.

2When using the SURR.BACK/ZONE2 amplifier as the ZONE2

•To use the ZONE2, turn on the ZONE2 button.

•The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit’s ZONE2 VOLUME button.

•The input source selected with the INPUT SELECTOR knob is output for the ZONE2 speaker output.

[System configuration and connections example]

Using this unit’s internal amplifier as the ZONE2.

Advanced Operation

ZONE2 OFF ZONE2 ON

CHANNEL

MODE 1 MODE 2

VOLUME

			Remote control unit operations during
	MAIN ZONE 5.1-channel systems		multi-source playback (selecting the source)
	Monitor		This is only possible when the main unit in the ZONE2 mode
			( page 16).
FL	FR	ZONE2	1 Set the MODE 1 switch to the “AUDIO”.
	C
DVD player	This unit	SW	2 Set the MODE 2 switch to the “ZONE2”.
	Input		RC-617
	ZONE2 SPEAKER OUT
			3 Press the ZONE2 ON button.
SL	RC-616	SR
			To cancel the ZONE2 mode:
		PROGRAMMABLE
			Press the ZONE2 OFF button.
	SYSTEM REMOTE	REMOTE CONTROL UNIT
	CONTROL UNIT RC-1000		The output level of the ZONE2 SPEAKER OUT
			4 terminals can be controlled pressing the
: ROOM-TO-ROOM REMOTE CONTROL SYSTEM (separately sold) control line			VOLUME button on the remote control unit.
: SPEAKER cable			Default setting (ZONE2 VOLUME LEVEL):
Refer to “Connections” ( page 11).			– – – dB (MINIMUM)

35

ENGLISH