Denon AVR-1508 DVD Player, Connecting the Monitor, Connecting the Playback Components, AVR-1508’s, input connectors, the pin connector outputs, •Connect the cables to be used

ENGLISH

Getting	Connecting the Monitor
	Connect the cables to be used.
Started	Monitor
		7*%&0
Connections	4 7*%&0	7*%&0	$0.10/&/5 7*%&0	)%.*
	*/	*/	*/	*/
			: 1# 13
Setup
Playback
Control Remote
Zone-Multi
Information
Troubleshooting	NOTE
	• The component video connectors may be indicated differently on your monitor. For details, see the
	monitor’s operating instructions.
	• To play the sound by AVR-1508, make analog or digital audio output connections to AVR-1508’s audio
	input connectors.
	• The signals output from the HDMI connectors are only the HDMI input signals.
	• AVR-1508’s S-Video connectors (input and output) and video connectors (input and output) have
	independent circuit structures, so that video signals input from the S-Video connectors are only output
	from the S-Video connector outputs and video signals input from the pin connectors are only output from
	the pin connector outputs.
	• The signals input to the component (color difference) video connectors are not output from the VIDEO
	output connector (yellow) or the S-Video output connector.

Connecting the Playback Components

Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.

DVD Player

•Connect the cables to be used.

•With HDMI connections, the video and audio signals can be transferred with a single cable.

DVD player

		"6%*0		7*%&0
"6%*0		$0"9*"-	)%.*	$0.10/&/5 7*%&0	7*%&0	4 7*%&0
065		065	065	065	065	065
-	3			: 1# 13
L	R
L	R

•Connect an HDP (High-Definition Player) in the same way.

•When using a optical cable for the digital audio connection, make the settings at “System Setup” – “Input Setup” – “Digital In Assign” (vpage 22).

•AVR-1508’s S-Video connectors (input and output) and video connectors (input and output) have independent circuit structures, so that video signals input from the S-Video connectors are only output from the S-Video connector outputs and video signals input from the pin connectors are only output from the pin connector outputs.

•The signals input to the component (color difference) video connectors are not output from the VIDEO output connector (yellow) or the S-Video output connector.

11