Turning Off the Sound Temporarily (Muting)

Press [MUTING].

To cancel, press [MUTING] again. Muting can also be canceled by adjusting the master volume.

Listening with HeadphonesPlug the headphones into <PHONES>.

The sound from the speakers and pre-out connectors is automatically cut.

Checking the currently playing program source, etc.Press STATUS.

The current program source and various settings are indicated on the display.

For details, refer to “Information” (vpage 30).

Switching the brightness of the display (Dimmer)Press DIMMER.

Bright Dim

OFF Dark

ENGLISH

Listening to FM/AM Broadcasts

Basic Operation

1Either turn <SOURCE SELECT> or press [TUNER] to select “TUNER”.

2Set [MODE SELECTOR 1] to “AUDIO”.

(vpage 39 “Remote Control Unit Operations”)

3Press BAND to select “FM” or “AM”.

Setup Connections Started Getting

NOTE

Be careful not to set the volume too high when using headphones.

Switching the front speakers

Press <SPEAKER>.

Video Select Function

Switch video input source while listening to audio signal.

Press VIDEO SELECT until the desired picture appears.

bTo cancel, press VIDEO SELECT to select “SOURCE”.

Playing Video and Audio Equipment

Basic Operation

1Prepare the equipment.

qLoad the DVD, CD or other software in the player.

(vSee the operating instructions of the respective devices.) wTo play a video device, switch the monitor input.

(vSee the monitor’s operating instructions.)

2Use SOURCE SELECT to select the input source.

3Set [MODE SELECTOR 1] to “AUDIO” or “VIDEO”. (vpage 39 “Remote Control Unit Operations”)

4Set [MODE SELECTOR 2] to the component you want to operate.5Start playback.

(vSee the operating instructions of the respective devices.)

4Tune in the desired broadcast station.qTo tune in automatically (Auto Tuning)

Press [MODE] to light the “AUTO” indicator on the display, then use TUNING to select the station you want to hear.

wTo tune in manually (Manual Tuning)

Press [MODE] to turn off the display’s “AUTO” indicator, then use TUNING to select the station you want to hear.

•It is also possible to switch to “FM” or “AM” in step 1 by pressing [TUNER].

•If the desired station cannot be tuned in with auto tuning, tune it in manually.

•When tuning in stations manually, press and hold TUNING to change frequencies continuously.

Troubleshooting Information Zone-Multi Control Remote Playback

32