Denon AVR-1508 hRemote ID Setup, Surround Playback of 2-channelSources, 2.In 3.Op, Option, Remote

ENGLISH

Getting
	hRemote ID Setup

DTS NEO:6 : The signals are decoded in DTS NEO:6 for playback.

	Set remote control ID.
Started	[Display]
Connections	1.Sp	2.In 3.Op
					E
	Option		Setup
					E
		6	Remote	ID	1
Setup	[Selectable items]	1	2	3	4

Surround Modes

Standard Playback

This is the standard mode for enjoying surround sound according to the program source.

Surround Playback of 2-channel Sources

Cinema

Music

neural

:This mode is suited for movie sources.

:This mode is suited for music sources.

:It is possible to play analog input signals and PCM (2-channel, 48 kHz or less) in the surround mode.

This is the optimum mode for playing sources recorded in XM HD Surround (vpage 34).

Playback	NOTE
	When using the AVR-1508 with only the included remote control unit
Remote	(RC-1075), there is no need to make settings.
	When using a separately sold remote control unit (RC-7000CI, etc.),
	this function can be used. Match the ID setting of the remote control
Control	unit and the receiver.
Zone-Multi
Information
Troubleshooting

To select these surround modes using the SELECT/ENTER knob on the main unit or press the STD button on the remote control unit. The mode switches each time the button is pressed.

n When using a surround back speaker
[Selectable items]	DOLBY PLgx	DTS NEO:6	neural
n When not using a surround back speaker
[Selectable items]	DOLBY PLg	DTS NEO:6	neural
DOLBY PLgx :The	signals are decoded in DOLBY PLgx or

or DOLBY PLg DOLBY PLg for playback.

Cinema : This mode is suited for movie sources.

Music : This mode is suited for music sources.

Game : This mode is suited for games.

Pro Logic : This is the Pro Logic playback mode. This can be selected when playing with a DOLBY PLg decoder. When this mode is selected, “DOLBY PL” is displayed.

Select the “Cinema”, “Music”, “Game” and “Pro Logic” modes at “Surround Parameter” – “MODE” (vpage 27).

25Operations (vpage 19)