Operating from the remote control unit

Adjusting with the remote control unit using the test tones is only possible in the “Auto” mode and only effective in the STANDARD mode. The adjusted levels for the different modes are automatically stored in the memory.

GAdjusting using test tonesH

qPress the TEST button.

Test tones are output from the various speakers.

w Use the o p button to adjust so that the volume is equal for all speakers.

e When the adjustments are completed, press the TEST button again.

•When “System Setup” – “Speaker Setup” – “Surround Back Speaker” setting (vpage 20) is set to “1spkr”, the surround back speaker display is “SB”.

•Speakers set to “None” in the speaker configuration settings are not displayed.

•When “Channel Level” is adjusted, the adjusted values are set for all the surround modes. To adjust the channel level separately for the different surround modes, use the operation see page 37.

Input Setup

Use this procedure to select the input source and make the settings related to playing input sources.

a, s HDMI In Assign

d ~ h Digital In Assign

jiPod Assign

kEXT. IN Subwoofer Level

lAuto Preset Memory

A0 Antenna Aiming

a, s HDMI In Assign

Select HDMI connector to assign to this source.

[Display]

1.Sp 2.In 3.Op

W

Input Setup

W

1 HDMI1 DVD

W

2 HDMI2 TV

[Input terminals] HDMI1 HDMI2 [Assignable input sources]

DVD/HDP TV/CBL VCR V.AUX

Input terminals

HDMI1

HDMI2

 

 

 

Default setting

DVD/HDP

TV/CBL

 

 

 

•With HDMI, the video and audio signals are transferred simultaneously. (The HDMI audio signal is output from the monitor.) At this time, set the input mode to “Auto”.

•The audio signals input from the analog, digital and EXT. IN connectors are not output to the monitor.

ENGLISH

d ~ h Digital In Assign

Select digital input connector to assign to this source.

[Display]

1.Sp 2.In 3.Op

W

Input Setup

W

3 COAX1 DVD

W

5 OPT1 CD

[Input terminals] COAXIAL1 COAXIAL2

OPTICAL1 OPTICAL2

[Assignable input sources]

CD AUX CDR DVD/HDP TV/CBL VCR V.AUX

Input terminals

COAXIAL1

COAXIAL2

OPTICAL1

OPTICAL2

 

 

 

 

 

Default setting

DVD/HDP

TV/CBL

CD

VCR

 

 

 

 

 

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Operations (vpage 19)

22