Option Setup

Make various other settings.

aAmp Assign

s ~ f Volume Control

g Auto Surround Mode h Remote ID Setup

aAmp Assign

Define how the amplifier for the surround back speaker channels is used.

[Display]

1.Sp 2.In 3.Op

E

Option Setup

E

1 Amp ZONE2

The places where the surround back amplifier are used can be set freely according to the usage environment. This makes it possible to output sound to rooms other than the room (the main zone) where surround playback is performed (multi-zone playback).

[Selectable items] 7.1ch ZONE2

For details, see “Amp Assign / Multi-zone Connections and Operations” (vpage 43).

s ~ f Volume Control

Set the main zone volume setting.

[Display]

1.Sp 2.In 3.Op

E

Option Setup

E

2 Limit OFF

E

3 P.On LAST

E

4 Mute FULL

Volume Limit

Make a setting for maximum volume.

[Selectable items]

OFF : Do not set a maximum volume. –20dB : Set the maximum volume to –20 dB. –10dB : Set the maximum volume to –10 dB. 0dB : Set the maximum volume to 0 dB.

Power On Level

This sets the volume set when the main zone’s power is turned on.

[Selectable items]

Last : Use the memorized setting from the last session.

–– – : Always use the muting on condition when power is turned on.

–80dB ~ +18dB : Set the volume level when the power is turned on in units of 1 dB.

Mute Level

This sets the amount of attenuation of the volume when the mute mode is set in the main zone.

[Selectable items]

Full : The sound is cut off entirely. –40dB : The sound is attenuated by 40 dB. –20dB : The sound is attenuated by 20 dB.

ENGLISH

gAuto Surround Mode

Make setting for memorizing surround mode setting for each input signal type.

[Display]

1.Sp 2.In 3.Op

E

Option Setup

E

5 AutoSurr. ON

[Selectable items]

ON : Memorize settings. Most recently stored surround mode is automatically selected.

OFF : Do not memorize settings. Surround mode does not change according to input signal.

The auto surround mode function lets you store in the memory the surround mode last used for playing the three types of input signals listed below.

qAnalog and PCM 2-channel signals (STEREO)

w 2-channel signals of Dolby Digital, DTS or other multi-channel format (DOLBY PLgx Cinema)

e Multi-channel signals of Dolby Digital, DTS or other multichannel format (DOLBY/DTS SURROUND)

bDefault settings are indicated in ( ).

Troubleshooting Information Zone-Multi Control Remote Playback Setup Connections Started Getting

Operations (vpage 19)

24