
Set up speakers (Audyssey® Auto Setup)
Parameter Check
This function enables you to check the measurement results and equalizer characteristics after Audyssey® Auto Setup.
1 Use uito select “Parameter Check” and then press ENTER.
|
| Auto Setup |
|
|
| Parameter Check | |
|
| Auto Setup | Sp. Config. Check |
|
|
|
|
|
|
|
| Sp. Config. Check | |||
|
|
| Distance Check |
|
| Distance Check |
|
|
| Parameter Check | |||||
|
|
| Ch. Level Check |
|
| Ch. Level Check | |
|
|
| Crossover Check |
|
| Crossover Check | |
|
|
| EQ Check |
|
| EQ Check | |
|
|
|
|
|
| Restore | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 orUsepui. to select the item you want to check, then press ENTER
Measurement results for each speaker are displayed.
Sp.Config. Check Check the speaker configuration.
Distance Check | Check the distance. |
Ch. Level Check Check the channel level.
Crossover Check Check the crossover frequency.
EQ Check | Check the equalizer. |
•If “EQ Check” is selected, press ui to select equalizing curve (“Audyssey” or “Audyssey Flat”) to
be checked.
Use o p to switch the display between the different speakers.
3 Press RETURN B.
The confirmation screen reappears. Repeat step 2.
Retrieving Audyssey® Auto Setup settings
If you set “Restore” to “Yes”, you can return to Audyssey® Auto Setup measurement result (value calculated at the start by MultEQ® XT) even when you have changed each setting manually.
19
version Basic
version Advanced
Information