Quick select function

All of the settings in step 1 can be memorized together. By memorizing frequently used settings, you can quickly access and enjoy a playback environment that is consistently the same.

nnSaving the settings

Set the items below to the settings you want to save.

1 q Input sourcez (vpage 20)

 

w Volume (vpage 21)

 

e Surround mode (vpage 27)

 

r Video Select (vpage 71)

 

t Audyssey Setting

 

(Audyssey MultEQ® XT, Audyssey

 

Dynamic EQ®, Audyssey Dynamic

 

Volume®) (vpage 55)

 

Press and hold the desired QUICK SELECT until

2 “Memory” appears on the display.

 

The current settings will be memorized.

 

 

GQuick select defaultsH

 

 

Input source

Volume

QUICK SELECT 1

BD

–40 dB

QUICK SELECT 2

SAT/CBL

–40 dB

QUICK SELECT 3

GAME1

–40 dB

QUICK SELECT 4

DOCK

–40 dB

BD

nnRecalling the settings

Press QUICK SELECT at which the settings you want to call out are saved.

Naming quick select settings

See “Quick Sel.Name” (vpage 66).

•The Quick Select function can be set separately for the different zones (vpage 46 “Quick select function”).

•If QUICK SELECT on the main unit is pressed, the same function as with the remote control unit can be obtained.

NOTE

Input sources stored with the quick select function cannot be selected if they have been deleted at “Source Delete” (vpage 65). In this case, store them again.

44

Convenient functions

Various memory functions

nnPersonal memory plus function

This function sets the settings (input mode, surround mode, HDMI output mode, MultEQ® XT, Dynamic EQ®, audio delay etc.) last selected for the individual input sources.

The surround parameters, tone settings and the volumes of the different speakers are stored for the individual surround modes.

nnLast function memory

This function stores the settings which were made before going into the standby mode.

When the power is turned back on, the settings are restored.

version Basic

version Advanced

Information