Quick select function

It is also possible to save four settings for ZONE2.

nnSaving the settings

1 Set the items below to the settings you want to save.

q Input source (vpage 45) w Volume (vpage 45)

2 Press ZONE SELECT to switch the zone mode to K(ZONE2).

3 In the zone mode for which you want to operate, press and hold the desired QUICK SELECT until “Memory” appears on the display.

The current settings will be memorized.

GQuick select defaultsH

 

Input source

Volume

ZONE2 QUICK SELECT 1

BD

–40dB

ZONE2 QUICK SELECT 2

SAT/CBL

–40dB

ZONE2 QUICK SELECT 3

–

–

ZONE2 QUICK SELECT 4

DOCK

–40dB

BD

nnRecalling the settings

1 Press ZONE SELECT to switch the zone mode to K(ZONE2).

2 Press QUICK SELECT at which the settings you want to call out are saved.

Naming quick select settings

See “Quick Sel.Name” (vpage 66).

46

Sleep timer function

This is useful when you want to sleep while listening in ZONE2.

1 Press ZONE SELECT to switch the zone mode to K(ZONE2).

2 Press SLEEP and display the time you want to set.

• The time switches as shown below each time SLEEP is pressed.

OFF 10 min 20 30 40 50

120 110 100 90 80 70 60

•If SLEEP on the main unit is pressed, the same function as with the remote control unit can be obtained.

To confirm the countdown time before putting the unit to sleep

Press SLEEP.

“Z2 Sleep : zmin” appears on the display. zz Countdown time

To cancel the sleep timer

Press SLEEP to set “OFF”.

The sleep timer is also canceled when this unit is set to the standby mode or the ZONE2 power is turned off.

version Basic

version Advanced

Information