ENGLISH
System Setup
Speaker Setup
Perform this setting if you wish to make the settings for your speaker systems manually.
1
S p e a k e r S e t u p
System Setup
Setting the Subwoofer Mode Setup
Select the method of playback of the subwoofer for playing the low bass signals.
Setting the Speaker Configuration
Automatically set the output component and properties for the various channels according to the combination of speakers to be actually used for surround playback.
1 Press F G to select “1. Sp”, then press ENTER.
2 Press D H to select the speaker, then press F G to set.
Large:
Select this when using large speakers with ample low frequency reproduction capabilities.
Small:
Select this when using small speakers without ample low frequency reproduction capabilities.
None:
Select this when no speaker is connected.
Yes / No:
Select “Yes” when a subwoofer is connected, “No” when no subwoofer is connected.
A subwoofer with sufficient low frequency playback capability can better handle deep bass than most main and surround speakers, and the system’s overall performance will be greatly enhanced when “Small” is set for the main (front) and surround speakers.
When “Front” is set to “Small”, “Subwoofer” is automatically set to “Yes”, and when “Subwoofer” is set to “No”, “Front” is automatically set to “Large”.
3 Press ENTER or H to enter the setting and switch to the Subwoofer Mode Setup setting.
2
1 F r o n t L a r g e
4S u b w o o f e r Y e s
3
5S W M o d e N o r m
•Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (bass sound below the frequency set for the Crossover Frequency) signals. If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.
17
1 Press F G to set.
LFE (Normal):
For any channel(s) that are set to “Large”, low frequencies in that channel’s corresponding source are directed to that loudspeaker only. The low frequencies played from the subwoofer are only the LFE signals and the low frequencies of channels set to “Small”.
LFE+Main:
Low frequencies from speaker channels that have been set to “Large” are reproduced from those speakers as well as from the subwoofer(s).
2 Press ENTER or H to enter the setting and switch to the Distance setting.
1
5S W M o d e +Main
2
6 F L | 1 2 f t |
•The subwoofer mode setting is only valid when and “Yes” is set for the subwoofer in the “Setting the Speaker Configuration”.
•Select the “LFE+Main” mode if you want low frequency signals to always be played from the subwoofer channel.
•Select the mode achieving a voluminous bass sound when playing music or movie sources.
ENGLISH