ENGLISH
System Setup
1
1 3 T . T O N E Y e s <
2
T . T o n e A u t o >
Input Setup
Setting the Digital In Assignment
This assigns the different input sources for the digital input terminals.
System Setup
Setting the iPod Assignment
It is possible to assign the Control Dock for iPod’s
3
T E S T T O N E O N
A U T O - F L
5
•To adjust the channel level separately for the different play modes after setting the channel level, perform the operation on page 32.
1 Press F G to select “2. In”, then press ENTER.
2 Press D H to select the input terminals, then press F G to set.
CD, AUX, DVD, TV, VCR, V.AUX,
Assign the different source according to the devices connected to the
3 Press ENTER or H to enter the setting and switch to the iPod Assignment setting.
1 Press F G to set.
CD, AUX,
When using a Control Dock for iPod, it is possible to connect with the audio input terminal of the assigned function.
DVD, TV, VCR, V.AUX:
When using a Control Dock for iPod, it is possible to connect with the audio and video input terminals of the assigned function.
OFF:
This is the factory default setting.
2 Press ENTER or H to enter the setting and switch to the EXT. IN Subwoofer Level setting.
¢Adjusting the test tone using the remote control
unit
Adjustment of the test tones using the remote control unit is only possible in the “Auto” mode and only valid in the STANDARD (Dolby / DTS Surround) mode. The adjusted levels are automatically stored for the different surround modes.
1 Press [TEST TONE].
• Test tones are output from the different speakers.
2 Press F G to adjust the volume.
3 Press [TEST TONE].
1
I n p u t S e t u p
2
1C O A X 1 C D
2C O A X 2 A U X
3
5 i P o d O F F
•Digital input terminal assignment not possible for “TUNER”.
•It is not possible to make the Digital In Assignment settings for the function assigned at iPod Assignment mode.
19
1
5i P o d C D
2
6 EXT.In SW +15
ENGLISH