ENGLISH
CSII-Mono mode
This mode plays back monaural recordings from any source, including CDs, DVDs and TV and radio broadcasts in compelling
Notes:
•CS II mode is available for 2ch input signals which are encoded in Dolby Digital or PCM format.
•
VIRTUAL
This mode creates a virtualized surround sound experience from a
STEREO
This mode bypasses all surround processing.
In stereo program sources, the left and right channels play normally when
With Dolby Digital and DTS sources, the 5.1 multichannels are converted to two channel stereo. 96 kHz PCM source material can be played back in stereo mode.
SOURCE DIRECT
In the Source Direct mode, the tone control circuit and bass management configuration are bypassed for
Notes:
•Speaker size is set to Front L/R = LARGE, Center = LARGE, Surround L/R = LARGE and Subwoofer = YES automatically. Tone controls, equalizer and additional processing are deactivated.
•When you use this mode with certain DVD and CD players, performing operations such as skip or stop may momentarily interrupt the output.
PURE DIRECT
The Pure Direct mode further reduces sources of noise in addition to effect of the Source Direct mode, by blocking output from the video jacks (VIDEO,
CAUTION
NOTE for DTS signal
*Connected DVD player, laserdisc player or CD player needs to support DTS digital output. You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the
*Depending on the player used, DTS play may produce a short noise. This is not a malfunction.
*While signals from a DTS laserdisc or CD are playing in another surround mode, you cannot switch to digital input or from digital input to analog input from the INPUT SETUP in the MAIN MENU or by pressing the A/D button.
*The outputs for VCR OUT, TAPE OUT, and
NOTE for Dolby Digital Surround EX signal
*When playing Dolby Digital Surround
*Note that some of Dolby Digital Surround
NOTE for 96kHz PCM audio
*AUTO,
*Certain DVD player models inhibit digital output. For details, refer to the player’s operation manual.
*Some DVD formatted discs feature copy protection. When using such disc, 96 kHz PCM signal is not output from the DVD player. For details, refer to the player’s operation manual.
NOTE for HDCD signal
*HDCD is effective only through digital input.
*You may not be able to play some HDCD source signals from certain CD players if you connect the player to the
28