Denon DN-A7100 manual Remote Control Operation, Function and Operation

ENGLISH

REMOTE CONTROL

OPERATION

FUNCTION AND OPERATION

zPOWER buttons

This buttons is used to turn the DN-A7100 on or off.

xDISPLAY button

Selects the display mode for the front display of the

b CL (Clear) button	⁄4 CH. SEL button
(When TUNER mode is selected)	(When TUNER mode is selected)
This button is used to erase the memory or program	Used to call up SETUP MAIN MENU and adjust
of a source.	speaker levels or 7.1 ch input level.

Used to remotely control the unit. You can switch between functions by pressing either the AMP or TUNER source buttons.

DN-A7100.

cSLEEP button

This button is used for setting the sleep timer.

nPRESET +/– buttons

(When TUNER mode is selected)

Used to select a preset station up and down.

⁄5 SOURCE button

These buttons are used to switch the source of your A/V Receiver / amplifer. Each time a source button is pressed, the remote control changes to the source which was pressed.

z

‹2

vNumeric buttons

mINFO button

(When AMP mode is selected)

Note:

Select the AMP as the source to use this remote

x ⁄6

c ⁄7

	⁄8
v	⁄9
	¤0
b	¤1
	¤2
n	¤3
	¤4
m
,	¤5
.	¤6
⁄0	¤7
⁄1	¤8
	¤9
⁄2	‹0
⁄3	‹1
⁄4

These buttons are used to switch between 0 to 9 of the source components.

If the source is set to the AMP (amplifi er), these buttons are used to perform operations.

(When AMP mode is selected)

1/AUTO button

Used to select auto surround.

2/Dolby button

Used to select DOLBY mode.

3/dts button

Used to select dts mode.

4/CSII button

Used to select CSII mode.

5/EX/ES button

Used to select EX/ES mode.

6/VIRTUAL button

Used to select VIRTUAL mode.

7/M-CH ST button

Used to select Multi Channel Stereo.

8/STEREO button

Used to select STEREO mode.

9/NIGHT button

Pressing this button prevents the Dolby Digital signal from playback at a loud voice. This function

When this button is pressed, the current setting are displayed on the TV monitor.

,1, 2, 3, 4(CURSOR) / ENTER buttons

(When AMP mode is selected)

These buttons are used when controlling the cursor of the DN-A7100.

.T.TONE button

(When AMP mode is selected)

Used to enter the test tone menu.

⁄0 CH/CAT3 (UP) / 4 (DOWN) buttons

(When TUNER mode is selected)

These buttons are used to change channels. Not used on this unit.

⁄1 BASS +/- buttons

These buttons are used to adjust the tone control of low frequency sound for left, right and subwoofer speaker.

controll with the DN-A7100.

⁄6 P.DIRECT button

When this button is pressed, the tone control circuit is bypassed.

⁄7 SURROUND button

This button is used to selects the surround mode.

⁄8 BAND/LIP SYNC button

(When TUNER mode is selected)

Used to select a radio band.

(When AMP mode is selected)

Used to select LIP SYNC mode.

⁄9 T-MODE button

(When TUNER mode is selected)

Used to select auto stereo mode or mono mode when the FM band is selected.

The “AUTO” indicator lights in the auto stereo mode.

⁄5

reduces the voice by 1/3 to 1/4 at maximum. Thus, it eliminates the occurrence of an abruptly loud voice at night. However, the function is valid only in the case when the Dolby Digital signal is entered into OPTICAL or COAXIAL and data to compress the voice exists in the signal to be played back.

When this button is pressed, the “NIGHT” indicator is illuminated.

0/7.1CH IN button

Press this button to select the output of an external multi channel decoder.

⁄2 XMCAT button

(When TUNER mode is selected)

Press this button is used to select the XM Category mode.

Not used on this unit.

⁄3 F.DIRECT button

(When TUNER mode is selected)

Used to select the "Frequency direct input".

¤0 P-SCAN button

(When TUNER mode is selected) Used to start preset scan.

8