Denon DN-HS5500 Adjusting the pitch, Pitch Bend, Power On Play, Relay Playback

ENGLISH

Adjusting the pitch

•With Pitch slider you can adjust the playback speed (Pitch).

•If you would not prefer to change key of sound, use the Key Adjust function.

Push the PITCH button to PITCH indicator lights up.

1 • PITCH ON ↔ OFF

	Pitch decreases
2	Move the Pitch Slider to adjust the
2	pitch. The current pitch setting is
	displayed on the display.

Pitch increases

DN-HS5500 has six pitch ranges, 4 %, 10 %, 16 %, 24 %, 50 % and 100%. When the RANGE button is pushed for more than 1 sec, the pitch range can be

3selected with the

PARAMETERS knob.

• When the PARAMETERS knob is pushed the pitch range is entered and the pitch range selection mode is cancelled.

Turning on the key adjust mode

Press the KEY ADJUST button to turn the key adjust mode on. “KEY” lights.

4Turning the key adjust mode off

Press the KEY ADJUST button to turn the key adjust mode off. “KEY” turns off.

Pitch Bend

•With PITCH BEND function you can change pitch temporary. DN-HS5500 has two ways for this function PITCH BEND buttons and PLATTER/SCRATCH disc.

[PITCH BEND +/– buttons]

• Push the PITCH BEND button for momentary change of pitch.

1While holding these buttons

down, the pitch continues to change up to the limitation.

•After releasing the PITCH BEND buttons, playback pitch returns to slider setting.

[PLATTER/SCRATCH disc]

•When the PLATTER SOURCE is set to SEARCH/BEND with

2	the PLATTER SOURCE
	button, the playback speed
	can be changed by turning PLATTER/SCRATCH
	disc during playback.

Power On Play

•When “ON” is set at “¤0PRESET (23) Power On Play” and a playlist is set, playback starts from the first file on the set playlist when the power is turned on.

In the standby or pause mode,	MEMO
press the Preset button for over 1	PRESET
press the Preset button for over 1
1 second to switch to the preset
mode.

Turn the PARAMETERS knob and select “Power On Play”.

2Press the PARAMETERS knob

to set.

Turn the PARAMETERS knob and select “ON”.

Press the PARAMETERS knob to set.

3✽ If you leave the preset

screen at this point, the playlist is not selected. In this case, the Power On Play function will not operate when the power is turned on.

	Turn the PARAMETERS knob
	and select the list from
	“Playlist” on the right side of
	the screen.
4	Press the PARAMETERS knob
4	to set.
	✽ If you leave the preset screen at this point
	without setting the playlist, the Power On Play
	function will not operate when the power is
	turned on.

Relay Playback

•Relay playback is a function for playing files on decks 1 and 2 of the DN-HS5500 continuously.

Starting relay playback

qPress the RELAY button for over 1 second to set the relay play mode.

The relay play mode is set as described below.

•When relay play mode is set for either of the decks, both Deck 1 and Deck 2 are set to the relay play mode.

•The “SINGLE” and “CONT.” indicators flash when in the relay play mode.

•When in the single play mode, once playback

1of the file on the currently playing deck is finished, playback starts on the other deck.

•In the continuous play mode, once playback of all the files on the currently playing deck is finished, playback starts on the other deck.

•Files/playlists on Deck 1 and Deck 2 can be played alternately.

✽It is possible to overlap playback on decks 1 and 2.

The time for overlapping can be set at “¤0 PRESET (4) Next File CFade”.

Stopping relay playback

2w In the relay play mode, press the RELAY button for over 1 second to turn the relay play mode

off.

ENGLISH