Exit/Reloop

rIn Seamless Loop playback, you

can force exit from or return to the loop.

EXIT:

While the Seamless Loop

5playback, push the EXIT/RELOOP button to exit from loop. DN-HS5500 continues playback after the B point.

RELOOP:

When the EXIT/RELOOP button is pushed after exit the loop, Seamless Loop playback resumes from the A point.

Stutter

A1 and A2 points can be also used for Stutter playback.

tTo enable stutter playback, push

6FLIP button for A1/A2 buttons,

then “ ” display turns off. Press the FLIP button to switch between the Hot Start/Seamless Loop and Stutter modes.

Clear the A1/A2 point

11A/B TRIM

The Seamless Loop A and B points can be fine-adjusted using the scratch disc.

Trim the points during loop playback as a rehearsal.

DECK1/2

 

 

 

 

 

NEXT FILE

B

 

HOT LIST

 

 

ADD

OMIT

MIRROR

 

 

 

MEMO

 

 

 

PRESET

 

AUTO/INPUT BPM

LOCK

FAST SEARTCH

DECK1:ORANGE

DECK2:GREEN

ENGLISH

w,r q

e

yWhile pressing the FLIP/(CLR) button, push the A1 or A2 button to clear the corresponding A and B points.

Or push the FLIP button for more than 1 sec to

clear both A1 and A2 points at once.

Quickly pressing the “FLIP” button first and then A1, A2 or B buttons will clear these points

7individually.

If the device has been changed in the file playback mode or if the playlist has been changed in the playlist playback mode, the A1 and A2 points are cleared by force.

A/B Trim

 

q When the A/B TRIM button is

 

Save the A or B point

 

pressed during seamless loop

4

r Push the flashing A button

 

playback, the A/B TRIM mode

1

again to save new A or B point,

is turned on.

 

and the unit automatically exit

 

 

 

To cancel A/B TRIM mode,

 

 

 

from the A/B Trim mode.

 

press the A/B TRIM button again.

 

 

 

 

Select A or B point

wPress the A1 or A2 button to

2

select point A. Press the B

button to select point B.

 

 

The loop that can be adjusted

 

is the currently playing loop.

Trim A or B point

eTurn scratch disc slowly to

 

move the A or B point 1

 

frame at a time.

3

• Range for trimming A or B

point is limited as follows.

 

 

±30 frames of point A and

 

up to 5 frames before point B

 

B point for Loop:

 

Between 5 frames after A point and file end.

18

ENGLISH