
ENGLISH
2INSTALLING THE PLATTER, THE SCRATCH DISC AND THE SLIPMAT
(1) INSTALLING THE PLATTER, THE SCRATCH DISC and THE SLIPMAT
(2) INSTALLATION
Please set up
(3) INSTALLING THE 7” RECORD ADAPTOR
Your own 7” vinyl record can be installed on this product by using the provided adaptor.
• Accessories |
|
q Aluminum Platter ................................................... | 1 |
1. | Install the Platter on the taper boss of the motor. |
2. | Install the Slip Mat on the Platter. |
This original design grants you the freedom to use your favorite vinyl record for that ultimate analog turntable feel.
*Make sure the record used is flat and not warped.
w Scratch Disc........................................................... | 1 |
e Slip Mat.................................................................. | 1 |
r Adaptor (1) ............................................................. | 1 |
3. | Insert D hole of the Scratch Disc on the D shaft of the |
| Motor. |
| NOTE: The printed face is located on the Slip Mat side. |
4. | Insert the Adaptor according to the direction of the |
| arrow. |
| NOTE: Please note the direction of insertion. |
•7” record adaptor accessories
q Adaptor (2) ............................................................. | 1 |
w Screw (< head) ..................................................... | 3 |
e Fixing Plate ............................................................ | 1 |
1. Set Adaptor (2) in the hole of 7” record. |
7” Record
Fig. 2
Adaptor (2)
Adaptor (1)
Fig. 1 | Scratch Disc | Scratch Disc |
Fig. 2 |
2. | Fix Plate with 3 screws. (< head). |
3. | Insert D hole of the Adaptor (2) on the D shaft of the |
| Motor. |
Slip Mat
Adaptor (1)
Slip Mat
(Groove side DOWN)
Adaptor (1)
4. Insert the Adaptor (1) on the Adaptor (2). |
Fig. 1 | Screw (< head) |
Fixing Plate
D shaft
Platter
Fig. 3
Taper Boss
(Motor Unit)
CAUTIONS: |
| NOTE: |
• Do not touch the motor unit. |
| Please note the position of Platter when you move DN- |
• Do not turn on the power without the Platter being |
| HS5500 after Platter is set. |
mounted. |
|
|
|
| |
|
|
|
7” record
NOTE:
Depending on the RECORD you choose, friction with
Adaptor (2) the Slipmat may not be enough, which can cause an undesired drag sound.
If so, use a different record that’s thicker or heavier.
3
ENGLISH