•File Export
| File Export |
| q At the top menu in the |
1 | Import/Export, turn the |
PARAMETERS knob and | |
| select “Export”. |
| Press the knob again to enter. |
wThe unit is set to the export mode.
Select the device to which the presettings are to be exported.
2
2Initialization
Use this procedure to format the internal HDD.
Also use this function to restore the presettings for both layers to the factory defaults.
•Setting the Initialization mode
At the top menu in the Utility mode, turn the PARAMETERS knob and select “Initialization”. Press the knob again to enter.
1
The “Initialization” list is displayed.
2
•Format (when installed)
Format
q At the top menu in the Initialization, turn the PARAMETERS knob and select “Format”.
Press the knob again to enter.
1w The unit is set to the format mode.
✽ Note: This procedure will erase all contents on the Hard Drive, be careful!
Selecting the device
q The currently connected devices are displayed on the left of the screen.
w Turn the
PARAMETERS
2knob and select the device to be formatted.
Press the
PARAMETERS knob to enter.
A popup confirmation message appears at the bottom left of the screen.
• When “OK” is selected:
3Formatting starts. When formatting
starts, a progress bar is displayed, allowing you to follow the progress.
•When “Cancel” is selected: The screen in step 1 reappears.
Canceling is not possible once the formatting operation starts.
| Once formatting is | |||||||
| completed, a popup |
|
|
|
| |||
|
|
|
| |||||
| confirmation message | |||||||
| asking whether you | |||||||
| want to switch to the |
|
|
|
| |||
|
| |||||||
| USB device mode |
|
|
|
|
| ||
|
|
|
|
|
| |||
|
|
|
|
|
| |||
| appears. |
|
| |||||
4 | • When “USB |
|
|
|
| |||
|
|
| ||||||
Device Mode” is selected: | ||||||||
| ||||||||
| If connected to a computer, the set switches to | |||||||
| the USB device mode. | |||||||
| If not connected to a computer, a message | |||||||
| appears. | |||||||
| • When “Cancel” is selected: | |||||||
| The database is created and the screen in step | |||||||
| 2 reappears. | |||||||
ENGLISH
•Factory Default
Factory Default
q At the top menu in the Initialization, turn the PARAMETERS knob and select “Factory Default”.
1Press the knob
again to enter.
wThe unit is set to
the factory default mode.
A popup confirmation message appears.
•When “OK” is selected:
The operation for
2 restoring the set to the factory defaults is executed.
To step 3.
•When “Cancel” is selected: The screen in step 1 reappears.
Once the operation is executed, the end screen is displayed.
•If the operation
3 | was successful: | |
“Complete” is | ||
| ||
| displayed. |
•If the operation has failed:
“Memory Error” is displayed.
32
ENGLISH