Denon DRA-295 manual Specifications

ENGLISH

12 SPECIFICATIONS

•	Audio section
	(Power amplifier)
	Rated output:	50 W + 50 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
	Output terminals:	A or B	14 to 16 Ω	/ohms
		A + B	18 to 16 Ω	/ohms
	(Analog)
	LINE input — PRE OUT
	Input sensitivity/input impedance:	200 mV / 47 kΩ /kohms
	Frequency response:	10 Hz ~ 50 kHz: ±1.5 dB
	S/N ratio:	98 dB (IHF-A weighted)
	Total harmonic distortion:	0.009 % (-3 dB at rated output,8 Ω /ohms) (1 kHz)
	Rated output:	1.2 V
•	Video section
	(standard video jacks)
	Input/output level and impedance:	1 V p-p, 75 Ω	/ohms
	Frequency response:	5 Hz ~ 10 MHz +1, -3 dB
•	Tuner section
		[FM] (note: µV at 75Ω		/ohms, 0 dBf = 1 x 10-15W)	[AM]
	Receiving range:	87.5 MHz ~ 107.9 MHz			520 kHz ~ 1710 kHz
	Usable sensitivity:	1.4 µV (14.2 dBf)			18 µV
	50 dB quieting sensitivity:	MONO	2.8 µV (20.2 dBf)
		STEREO	23µV (38.5 dBf)
	S/N ratio:	MONO	80 dB (IHF-A weighted)
		STEREO	75 dB (IHF-A weighted)
	Total harmonic distortion:	MONO	0.15 % (1kHz)
		STEREO	0.3 % (1kHz)
•	General
	Power supply:	AC 120 V, 60 Hz
	Power consumption:	3.0 A
	Maximum external dimensions:	434 (W) x 147 (H) x 417 (D) mm (17-3/32” x 5-25/32” x 16-27/64”)
	Weight:	9.2 kg (20 lbs 4.5 oz)

•Remote control unit (RC-895)

Batteries:	R6P/AA Type (two batteries)
External dimensions:	50 (W) x 179 (H) x 22 (D) mm (1-31/32” x 7-3/64” x 55/64”)
Weight:	125 g (Approx. 7.5 oz) (including batteries)

* For purposes of improvement, specifications and design are subject to change without notice.

21