ENGLISH

4 CONNECTIONS

NOTES:

•Read the manuals of all the components when making connections.

•Keep the power supply cord unplugged until all connections have been completed.

•If the power is on when connections are made, noise may be generated and damage the speakers.

•Be sure to connect the left and right channels properly, L (left) to L, R (right) to R.

•Plug the power supply cord securely into the power outlet. Incomplete connection may result in noise.

•Binding the power supply cord together with connection cords may result in humming or noise.

(1) Connecting to a TV

•Use the included audio video cord to connect the TV’s video input connector and audio input connectors to the DVD-2910/955’s VIDEO OUT or S-VIDEO OUT and AUDIO OUT.

S-Video output connector

The video signals are divided into color (C) and brightness (Y) signals, achieving a clearer picture.

If the TV is equipped with an S-Video input connector, we recommend connecting it to the DVD-2910/955’s S-Video output connector using a commercially available S-Video connection cord.

DVD-2910/955

To power outlet

L R

S-VIDEO IN VIDEO IN

AUDIO IN

 

TV

NOTES:

•Connect the DVD-2910/955’s video outputs to the TV either directly or through an AV amplifier. Do not connect it via a VCR (video cassette recorder). Some discs contain copy prohibit signals. If such discs are played via a VCR, the copy prohibit system may cause disturbance in the picture.

•Set the “TV TYPE” in “VIDEO SETUP” in “SETUP” to comply with your TV’s video format. When the TV is NTSC formatted set to NTSC. (See pages 32, 33.)

•To use with 5.1ch audio output, set “2CH (SRS OFF)” or “2CH (SRS ON)” under “AUDIO CHANNEL” in “AUDIO SETUP” on the “SETUP” menu to the initial settings.

(See page 34.)

•Set the “TV ASPECT” in “VIDEO SETUP” in “SETUP” to comply with your TV’s aspect. (See page 32.)

•To use with video out or s-video output, set “INTERLACED” in “VIDEO OUT” in “VIDEO SETUP” in “SETUP” at the initial settings. (See pages 32, 33.)

10